Mission Swapping?

[GreenOmnitrix]

Can anyone please tell me all the missions names in scripts.img? I also tried switching Arcrace1.lur with a  mission (1_04) and played the mission but it never loaded. IT just says LOADING...  forever and crashes

[Prosecute]

Look in umt, it has all the mission names their

[deadpoolXYZ]

Steman I have noticed that the missions that have the ''Test'' word load properly the missions. I mean I swamped to the mission showdown at the plant. The mission instructions didn't load (right arrow by default key) and the door at the begging couldn't open when I pressed the buttons. I loaded the one with the Test word and It loaded well.

[Prosecute]

yes deadpool good observation as allways, i have noticed this also, (and yes this has been noted in umt mission swap section) for some reason the test ones appear to fix various interactions like the one you mentioned and the tenements mission etc, i'm not 100% certain as to why this is as im sure when you do the mission normally it loads the same file, but if i had to have a guess I think it has something to do with the "RunMissionLib" file which is loaded up during the test mission scripts, (this explains why the cutscenes and the mission pass text appear during these scripts when you boot them up) allthough their is no theory as to why these interactions don't work fully but its just a complete guess, what other reason can their be?

[GreenOmnitrix]

Thanks Steman, when I change Gary using the model id's in the 1_04.lur to Earnest and change 1_04.lur to ArcRace1.lur, it loads the mission but it keeps Gary?!

[deadpoolXYZ]

It should change gary to earnest. In my first try it didn't work but then It did.

[GreenOmnitrix]

Are you supposed to use the test one? I used replaced 1_04 with Arcrace1 and edited it with hex editor. In hex editor, I searched Gary's 3 numbered hex value and replaced it with Earnest's 3 numbered hex value also. When I played the arcade machine, it loaded the mission up good but didn't use Earnest as a bodyguard.

[deadpoolXYZ]

What I do to load the mission properly and modify the mission is this.

Rename ArcRace1 to Test1_04 and the same the oposite way. Then extract the one that only says 1_04 and edit it. Just search for gary's code and replace it with the one from earnest.
Oh by the way the bodyguard can't attack in that mission.

[GreenOmnitrix]

OH! So you only use the test mission files?

[GreenOmnitrix]

So basically what you're saying is that I replace and rename the Test 1_04 and arcrace1 then JUST edit the OTHER 1_04?!

[Prosecute]

So basically what you're saying is that I replace and rename the Test 1_04 and arcrace1 then JUST edit the OTHER 1_04?!

Yea this is exactly what hes saying, but its only required on certain missions so don't let it confuse you, their are only a few missions where the "test" script is used to fix stuff. these are generally interactive errors, for the model swap i would recommend doing what deadpool says also, just extract 1_04 and edit it, press ctrl and r, change the "test string" into "hex value" and put garys 3 didget model id (the hex one) into the top combobox and earnests in the other, press enter, save, and then replace 1_04

[GreenOmnitrix]

Ok so I'll just stick with 1_04 not the test for that then. thx

By the way, this is my 100th post! 

[Prosecute]

wd green on your 100th post

...did the model swap work for you also?

[deadpoolXYZ]

In certain missions when you model swamp that char can't damage jimmy. I mean in the mission the tenements I replaced the whole greaser faction with the bullies. The problem is that none of them could damage jimmy with their hits. This also happened to me in other missions. The respect to jimmy is the problem?

[GreenOmnitrix]

Yeah the model swapped worked with the test file. Deadpool, I think you should edit the attitude file in the program files because if your not in endless summer then it might change!